Get the Xtra Edge - SkillUp 2025! Use your SkillsFuture Credit $500 before it expires on 31 Dec 2025 to invest in your learning and skill development! [Note: Our website is best viewed on MS Edge.]

[NP-DEE] Diploma in Engineering (Electrical) (DEE)

Offered by School of Engineering

Part-time Diploma

About Course
Course Schedule
Course Structure
Entry Requirements
Financial Matters
Apply Register Interest
Area of interest
Electrical & Electronic Engineering, Engineering

About Course

Course Objectives

The main objective of the part-time Diploma in Engineering (Electrical) is to offer the working adults with a broad-based curriculum in electrical, electronics, instrumentation and power engineering in order to upgrade their knowledge and skills required by the industry. This knowledge is highly sought by industry involved in the construction industry, process automation, manufacturing, facility maintenance and utilities. In general, electrical technicians are in demand by most industries and with many job opportunities readily available for the graduates.

Course Description

The Diploma in Engineering (Electrical) is a part-time CET course, consist of the following modules:
1) DC Technology & Applications (60hrs)
2) AC Technology & Applications (75hrs)
3) Basic Electronics & Applications (60hrs)
4) Digital Electronics & Applications (60hrs)
5) Analog Electronics & Applications (60hrs)
6) Microcontroller Programming (60hrs)
7) Electrical Circuit Analysis* (60hrs)
8) Electrical Machinery (60hrs)
9) Power Electronics & Applications (60hrs)
10) Industrial Control & Automation (60hrs)
11) Control System Formulation & Analysis (60hrs)
12) Sensors & Instrumentation System (60hrs)
13) Electrical Circuit Analysis* (60hrs)
14) Distribution System Design (60hrs)
15) Distribution System Protection (60hrs)
*Common module to be taken either in Certificate 3 or 5

Trainer's Profile

Or Lye Chin, James

James Or holds a BEng and MEng from NUS/NTU in Electrical and Electronic Engineering.

James’s expertise in university projects is in the areas of noise cancellation using adaptive filtering, and the study of sorting algorithms using C in Unix machine.

Prior to joining Ngee Ann Polytechnic, James worked in areas related to Remote Sensing, Image Processing, Neural Networks, Micro-controllers and programming in multi-processor embedded system.

James has completed some consultancy projects related to distributed control system nodes using Neuron chips for building control, home automation and industrial applications.

James has published some papers when doing project works and while pursuing master degrees in IFAC Workshop on Distributed Computer Control System Seoul Korea and IEEE ICARV Singapore on image processing using Transputers.

James is currently a lecturer in Ngee Ann Polytechnic teaching electrical engineering modules. His areas of teaching are Electronics, C Programming, Distributed Control Systems, Electrical Installation Design, Electrical Circuit Analysis, Programmable Logic Controllers and Microcontroller. His role in course management of CET Part-time electrical engineering diploma has enabled him to use programming languages like VBA and Python to aid in his works in management, grouping and enrolment.

Course 
Schedule

  1. Registration Period 27 Mar 2025
  2. Course Date 21 Apr 2025 - 31 Mar 2026
  3. Venue NGEE ANN POLYTECHNIC
  4. Mode of Training Classroom
  5. Schedule Info Ngee Ann Polytechnic reserves the right to reschedule / cancel any programme, modify the fees and amend information without prior notice.

Course Structure

TPG course reference No.

TGS-2023019986,TGS-2023021198,TGS-2023019988,TGS-2023019987,TGS-2023019990,TGS-2023019989

Diploma in Engineering (Electrical)

Certificate in Electrical System Design & Protection
Distribution System & Protection (NP-010350)
This module provides the students with practical knowledge of high voltage (HV) distribution system (up to 22 kV), the electrical equipment used, the protection and safety schemes/devices implemented for the protection of both the equipment and working personnel.
Extensive working examples of practical HV distribution equipment such as switchgear, transformer, power cable, protection system and safety earthing practice are included. Fault level calculation (using per unit method) of typical radial network and the protection setting calculation of both DTL and IDMTL over-current and balanced earth-fault protection will be covered.
The participants will learn the design of typical HV distribution system, the selection and the testing and commissioning of HV equipment, the calculation of fault level and protection setting to achieve relay co-ordination and discrimination, and the necessary safety procedures and measures required in the operation and maintenance of HV equipment.
Distribution System Design (NP-010349)
This module focuses on electrical installation design for residential, commercial and industrial premises. On completion of the module, students will be able to understand the elements of the electrical distribution in Singapore and the techniques used in the design. Topics such as sizing of protective devices and cables, design of electrical layout and single-line diagram will be covered. They will also be taught on specific issues such as concept of discrimination in circuit protection, earthing and design requirements of CP5 and good engineering practices.
Certificate in Electronic Devices & Applications
Analog Electronics & Applications (NP-009783)
This module aims to provide students with knowledge of the operating principles and the design characteristics of commonly used analogue devices and circuits. It also illustrates their applications in various practical circuits.
Digital Electronics & Applications (NP-009782)
This is a hands-on intensive module designed to help the students to design and build application projects based on digital electronics. It covers the fundamentals of digital electronics, the basic principles and techniques of digital system design. The main topics covered are Number systems, Boolean Algebra, Combinational logic circuits, Flip-flops and multivibrators, IC Counters, and Data handling devices.
Microcontroller Programming (NP-009784)
This module introduces students to the fundamentals of microcontroller architecture as well as basic programming to interface with various external input and output devices. C programming language together with 8051 microcontroller and interfacing circuits are used to illustrate a working microcontroller system.
Certificate in Fundamentals of Electrical & Electronic Engineering
AC Technology & Applications (NP-009715)
This module aims to provide students with the fundamental knowledge and skills to understand the principles and operations of ac systems and devices in the industry. It covers single phase and three-phase systems, operations of power transformer, ac motor, ac generator and their applications. The module will also introduce students to electrical safety and proper use of modern measuring equipment for the industries.
Basic Electronics & Applications (NP-009716)
This module aims to introduce students the basics of electronic devices and some common applications. It includes an introduction to semiconductor physics as well as the construction, operating principles and common applications of diodes and transistors. Electronic circuits covered include rectifiers, voltage regulators, waveform clippers and surge protection. Calculations of average and root-mean-square (rms) values of periodic signals are also taught.

On completion of the module, students should be able to analyse and calculate the electrical parameters of diode and transistor circuits. They should have acquired sufficient knowledge and skills to design simple Zener voltage regulator as well as transistor circuits as an electronic switch or as a voltage amplifier.
DC Technology & Applications (NP-009714)
This module provides the students with the necessary knowledge and skills in solving dc network by using Ohm's Law, Kirchhoff's Law and Thevenin Theorem. Topics covered include series circuits, parallel circuits and series-parallel circuits which are arranged in easy to understand style. Applications sections are included to establish a link between theoretical concepts of the topics and the real, practical world. Examples of the application section include how series circuits can be very effective in the design of safety equipment, how parallel circuits configuration is done in basic household wiring.
Certificate in Instrumentation & Control
Control System Formulation & Analysis (NP-009987)
This module introduces students to the fundamentals of feedback control principles. It covers basic concepts of automatic control, control systems hardware, simple analytical tools and stability analysis of systems. An introduction to the use of MATLAB as a computer tool for control system design is also included.
Industrial Control & Automation (NP-010155)
This module will train students in the design and wiring of electrical control systems. It covers various motor starters connection and sequential motor control circuits, The module will also introduce students to programmable logic controllers, control devices and relevant window-based programming software. Students will learn the design of ladder diagrams for programming the programmable logic controller for industrial applications.
Sensors & Instrumentation System (NP-010156)
The aim of this module is to introduce students to the fundamental concepts of measurements, sensors and transducers, signal conditioning and data acquisition. Students will be taught the principles of operations of a variety of sensors and transducers including temperature sensors, strain gauges, voltage and current transducers, and LVDT transducers etc. Signal conditioning circuits using op-amp, Wheatstone bridge and low pass filter will also be included. Students will have the hands-on practice on sensors characterisation, build and test sensor circuits and simple data acquisition using LabVIEW, a virtual instrumentation software.
Certificate in Power Electronics & Drives
Electrical Circuit Analysis (NP-010018)
This module introduces students to the concepts and theorems which are needed in the field of electrical engineering technology. The topics include circuit analysis and network theorems, single-phase and three-phase system analysis, power measurement and power factor correction, the "a" operator and per unit system, harmonics, and transients. The module provides the foundation to equip students in analysing electrical circuits, applying the relevant theories and techniques to solve and troubleshoot circuit problems, and designing electrical systems.
Electrical Machinery (NP-010019)
This module aims to provide participants with the basic concepts and working principles of common type of electrical machines and drives used in the industries. The module will cover the construction, working principles, performance characteristics, speed control and industrial applications of transformers, motors and generators.
Power Electronics & Applications (NP-010020)
This module aims to provide participants with broad-based understanding and hands-on practical experience on power electronics converters and some of their applications.

Participants get to learn the principles of operation and waveform analysis of power converters, including speed control of AC / DC motors, found in motor drives of MRT trains, escalators, electric cars and ship propulsion in the industries, as well as in applications like light dimmers, instant water heaters, blenders and many others.

Entry Requirements

Condition 1

Highest qualification

GCE ‘O’ Level grade:
  • English Language (Grade 1-6)
and

Highest qualification

GCE ‘O’ Level grade:
  • Mathematics (Grade 1-6)
and

Highest qualification

GCE ‘O’ Level grade:
  • Science (Grade 1-6)
And Working experience:At least 1 year of relevant work experience.
or

Condition 2

Highest qualification

NITEC with GPA >= 3.5
or

Condition 3

Highest qualification

NITEC with GPA >= 3.0 And Working experience:At least 1 year of relevant work experience.
or

Condition 4

Highest qualification

Higher NITEC with GPA >= 2.0
or

Condition 5

Highest qualification

Higher NITEC with GPA >= 1.5 And Working experience:At least 1 year of relevant work experience.
or

Condition 6

Highest qualification

NITEC in Technology with GPA >= 3.5 And Working experience:At least 1 year of relevant work experience.
or

Condition 7

Highest qualification

NITEC in Services with GPA >= 3.5 And Working experience:At least 1 year of relevant work experience.
or

Condition 8

Highest qualification

Higher NITEC in Technology with GPA >=2.0 And Working experience:At least 1 year of relevant work experience.
or

Condition 9

Highest qualification

Higher NITEC in Services with GPA >=2.0 And Working experience:At least 1 year of relevant work experience.
or

Condition 10

Highest qualification

Relevant Advanced WSQ Certificate (or higher) and Level 6 WSQ Workplace Literacy SOA and Workplace Numeracy SOA
and

Highest qualification

- And Working experience:At least 1 year of relevant work experience.
or

Condition 11

Working experience

Applicants with at least 2 years of relevant working experience may apply for the course

Financial matters

Course fees payable (incl. GST & excl. supplementary fee)

Description Certificate in Electronic Devices & Applications Certificate in Electrical System Design & Protection Certificate in Fundamentals of Electrical & Electronic Engineering Certificate in Instrumentation & Control Certificate in Power Electronics & Drives Total course fee
Full Course fee $5,552.46 $3,701.64 $6,015.17 $5,552.46 $5,552.46 $26,374.19
Singapore Citizen Aged 40 & Above $555.25 $370.16 $601.52 $555.25 $555.25 $2,637.43
PR Sponsored by SME $578.17 $385.45 $626.34 $578.17 $578.17 $2,746.30
Singapore Citizen Sponsored by SME $578.17 $385.45 $626.34 $578.17 $578.17 $2,746.30
Singapore Citizen Aged Below 40 $832.87 $555.25 $902.27 $832.87 $832.87 $3,956.13
Singapore PR $2,220.98 $1,480.66 $2,406.07 $2,220.98 $2,220.98 $10,549.67
Long-Term Visit Pass Plus $5,552.46 $3,701.64 $6,015.17 $5,552.46 $5,552.46 $26,374.19

GST rate

The course fees payable above are inclusive of 9% GST rate.

Payment option

The first payment needs to be made after accepting the offer.

Allowed payment by

The course fee allows to be paid by:
Post-Secondary Education Account (Adhoc withdrawal form);
SkillsFuture Credits (SFC);
Credit card (e-payment);
Debit card (e-payment);
PayNow (e-payment).

Nett Supplementary Fees Payable

  • GPA Insurance Fee S$2.11,subject to GST,fees payable S$2.30 Allow payment by Post-Secondary Education Account (Adhoc withdrawal form); Allow payment by Post-Secondary Education Account (Standing order form)
  • Other Fees S$7.43,subject to GST,fees payable S$8.10 Allow payment by Post-Secondary Education Account (Adhoc withdrawal form); Allow payment by Post-Secondary Education Account (Standing order form)

Refund and withdrawal policy

  • Please note that a 100% refund will be available if the withdrawal request is submitted more than or equal to 14 days before the course start date.
  • Please note that a 50% refund will be available if the withdrawal request is submitted less than 14 days before the course start date.
  • Please note that no refund will be available if the withdrawal request is submitted on or after the course start date.